LVQ-15 Non-Contact Discharge Radar Sensor
LVQ-15 Non-Contact Discharge Radar Sensor

LVQ-15 / LVQ-35 Non-Contact Discharge Radar Sensor

Other models available

KISTERS’ LVQ-15 and LVQ-35 are sensors for continuous discharge measurement of rivers, open channels and canals with known cross-section profile. The sensors use innovative radar technology to measure velocity, water level and discharge. They enable reliable,…Read more

Protection Class IP 67
Power
  • Supply: 6 to 30 VDC 
  • Consumption at 12 VDC: standby approx. 1 mA, active measurement approx. 140 mA 
  • Over voltage protection, reverse voltage protection, lightning protection (integrated protection against indirect lightning with a discharge capacity of 0,6 kW Ppp)
Temperature and Humidity
  • Operating and storage temperature: -40 to 60 °C (-40 to 140 °F) 
  • Relative humidity: 0.. to 100 %
Interface
  • Outputs RS-485 ASCII / Modbus RTU, SDI-12 
  • Analog output: 4 to 20 mA (14 bit, max. load 250 Ω) 
  • Digital output (low: 0V, high: Vsupply, max. 1.5 A)
Material Housing material powder-coated aluminum, vandalism-proof (stainless steel option available)
Dimensions and Weight
  • L x H x W: 338 mm x 333 mm x 154 mm (13.31 x 6.06 x 13.11 in), 5.4 kg (11.90 lb) 
  • Mounting Bracket (included): Ø 34 to 48 mm
Water Level Measurement
  • Measurement range (distance between level sensor and water surface):
    • Standard LVQ-15: 0 to 15 m (0 to 49.21 ft)
    • Extended version LVQ-35: 0 to 35 m (0 to 114.83 ft) 
  • Measurement frequency: 80 GHz (standard LVQ-15), 26 GHz (extended version LVQ-35) 
  • Resolution 2 mm 
  • Accuracy: ± 0.025 % FS Level sensor opening angle: 8° (standard LVQ-15), 10° (extended version LVQ-35)
Velocity Measurement
  • Detectable measurement range: 0.08 to 18 m/s (depending on waves) 
  • Accuracy: +/- 0.01 m/s; +/- 1 % FS 
  • Resolution: 1 mm/s 
  • Direction recognition: +/- 
  • Measurement duration: 5 to 240 s, measurement interval: 8 s to 5 h 
  • Radar: frequency 24 GHz (K-Band), opening angle 12° 
  • Distance to water surface:
    • 0.50 to 35 m
    • 0.05 to 130 m (0.16...426.51 ft) 
  • Vertical inclination measured internally 
  • Necessary minimum wave height: 3 mm
Automatic vertical angle compensation Accuracy +/- 1°, resolution +/- 0.1°

KISTERS’ LVQ-15 and LVQ-35 are sensors for continuous discharge measurement of rivers, open channels and canals with known cross-section profile. The sensors use innovative radar technology to measure velocity, water level and discharge. They enable reliable, non-contact measurement without the need for structural work in the water.

Thanks to the non-contact radar technology the LVQ is not susceptible to contamination, debris or driftwood in the water. Furthermore, the non-contact measurement provides very low maintenance and fail-safe operation especially during high water or flooding.

The LVQ can be simply mounted on bridges, on the roofs of closed canals or channel superstructures. Depending on the properties of the water surface the device can be installed in a height of 0.5 to 35 m. LVQ is available in two versions: 

  • LVQ-15: water levels from 0 to 15 meters 
  • LVQ-35: water levels from 0 to 35 meters

The measurable velocity range is between 0.10 and 15 m/s. Additionally the direction of flow is detected, enabling the operation in tide influenced rivers.

Measuring principle

The non-contact radar technology determines the water surface flow velocity using the Doppler frequency shift method and furthermore the water level is established by a travel time measurement. With known cross section profile the discharge Q of the water is calculated.

  • Non-contact, maintenance-free measurement system; no structural work needed 
  • Fully operating even in flood water situations 
  • Low power consumption enables operation using solar cells 
  • Detection of flow direction 
  • Recognition of hysteresis effects 
  • Measures in backwater situations 
  • Automatic installation angle correction 
  • Automatic discharge calculation based on hydraulic model with multiple k-factors 
  • Sensor self check with status and error output 
  • 3-point velocity calibration certificate 
  • Water level and velocity sensor combined in one weather and vandalism proof housing

LVQ enables discharge measurement for rivers, streams, open channels and canals for which continuous monitoring is desired. The bed of the water should be as stable as possible in order to provide consistent measurement. A visible swell must be evident on the water surface. 

  • Hydrography 
  • Water storage management 
  • Flood detection 
  • Hydraulic engineering 
  • Water resource management 
  • Hydrological modelling and simulation